On the receiving device
- Click on Windows “Start” button
- Click on “Settings”
- Click on “System”
- Click on “Projecting to this PC” in the column on the left side of the screen
- Set the “Some Windows and Android devices can project to this PC when you say it’s OK” drop-down menu and select the Always Off option.
- Set the “Ask to project to this PC” drop-down menu and select the Every time a connection is required option.
- Set the “Require PIN for pairing” drop-down menu and select the Never option.
- Turn off “This PC can be discovered for projection only when plugged in to power”
- Click on the Windows “Start” button again
- Type the word connect
- Choose the first option that comes up
- Click the double headed arrow button in the bar at the top of the screen to enter in full-screen mode.
That computer is now ready to receive the screen of the other computer.
On the sending device (eg the one with Opticabase on)
- Open the action centre by clicking on the small icon on the far right of your taskbar along the bottom of your screen.
- Click on the “Connect” button
- Click the device you want to project the screen. (It may take a while to appear.)
Now you should see your Main computer screen mirrored on your second computer/laptop/tablet
For future connections
- On the secondary device click on the Windows “Start” button
- Type the word connect
- Choose the first option that comes up
- Click the double headed arrow button in the bar at the top of the screen to enter in full-screen mode.
- On the main device open the action centre by clicking on the small icon on the far right of your taskbar along the bottom of your screen.
- Click on the Connect button
- Choose the computer/laptop/tablet you want to connect to.